MAMMUT silage roller – the hydraulically adjustable models

Variable working width for feed preservation flexibility

With the hydraulically adjustable models of the SILO KOMPAKT silo roller, a working width of 2.50 or 3.00 m can be chosen. The frame, which is guided by a slide bearing, can be easily moved 500 mm to the left or right with a hydraulic cylinder. This makes working safe and comfortable, particularly at the edges or silo walls, and also increases the range of use of the device in the compaction process.

Hydraulically adjustable frame

Roller diameter = 940 mm

2.50 m or 3.00 m wide

Individually adjustable overall weight

SILO KOMPAKT standard equipment - hydraulically adjustable model
Frame hydraulically adjustable 500 mm on left and right
Three-point attachment cat. 2, cat. 3 and cat. 4
Roller and frame can be filled with water
Headstock can be filled with water, sand or gravel
Lateral rollers to protect roller and silo wall
Mechanical towing hook


Convenient – the hydraulic lateral adjustment

The SILO KOMPAKT silage roller is also available as a hydraulically adjustable model in widths of 2.50 and 3.00 m. The roller can easily be moved 500 mm to the right or left with a dual-acting hydraulic cylinder.

This makes work safe and comfortable, particularly a the edges or the silo wall, since you do not need to roll to the outermost edge with the tractor tyres.

The use of the silo roller also increases the working comfort for the driver considerably, since the feed is compacted over the entire track width of the roller and the compaction time is therefore significantly reduced.

Technical data

SK 250 HSK 300 H
FrameCan be moved 500 mm to left and rightCan be moved 500 mm to left and right
Width2.500 mm3.000 mm
Overall roller diameter940 mm940 mm
Number of discs1214
Basic weightapprox. 1.740 kgapprox. 1.920 kg
Additional weight by water filling
(standard equipment)
approx. 600 kgapprox. 700 kg
Maximum weight
(only reachably with extra equipment)
approx. 3,380 kgapprox. 3,660 kg
AttachmentThree-point cat. 2, cat. 3 and cat. 4Three-point cat. 2, cat. 3 and cat. 4


Silage edge compactor – can also be combined with hydraulic lateral adjustment

Particularly when compacting grass or maize silage in freestanding heaps without walls, it is often a challenge to build up the edges firmly and evenly and secure them without the risk of the roller tractor tipping over. Because here, too, it is important that the silage is of consistently high quality throughout the entire silo.

The side edge compactor, which is available as an accessory, provides help here. This option can be mounted either at one side (left or right) or both sides.

A dual-acting control system on the tractor is required to control the lateral silage edge compactor. The electrical control system, which is also available as an accessory, provides help if the tractor does not have a sufficient number of dual-acting control units.

Other models:


200 to 300 cm roller width
Rigid frame