MAMMUT Shear bucket Silo Bucket H
The high series for wheel loaders and telehandlers
This shear bucket equips it perfectly for wheel loaders and telehandlers. Thanks to the big opening height, from 1.10 m, the SILO BUCKET H is also able to pick up and spread round bales conveniently. With a block volume of 1.48 to 2.12 m³, these models offer versatile options for use on a huge range of sizes of farm and also on their respective carrier vehicles.
Also suitable for round bales
Ideally suited for use on big wheel loaders and telehandlers
Block height of approx. 110 cm
Volumes of 1.48 m³ to 2.12 m³
Standard equipment for the Silo Bucket H |
---|
Robust cutting bucket with welded Hardox cutter |
Two hydraulic cylinders, Ø 110 mm |
Closed bucket bottom including Hardox scraper strips |
Powder-coated carrier frame |
Hydraulic hoses and couplings |
Basic equipment without any attachments |
Maximum operating pressure 210 bar |
Technical data
SB 170 H | SB 195 H | SB 220 H | SB 240 H | |
---|---|---|---|---|
Block width | 1,69 m | 1,94 m | 2,19 m | 2,41 m |
Block height | 1,10 m | 1,10 m | 1,10 m | 1,10 m |
Block depth | 0,80 m | 0,80 m | 0,80 m | 0,80 m |
Fill volume | 1,48 m³ | 1,71 m³ | 1,93 m³ | 2,12 m³ |
Cylinders Ø (2 pieces) | 110 mm | 110 mm | 110 mm | 110 mm |
Net weight | 980 kg | 1.080 kg | 1.180 kg | 1.280 kg |
Accessories
Can be combined with every carrier vehicle
With the SILO BUCKET, a very wide range of attachment variants is available for front-loaders, farmyard loaders, wheel loaders and telescopic handlers. All the attachments are bolted and are easy to replace without the need for welding – which means that the SILO BUCKET can also quickly and simply continue to be used when switching to a different carrier vehicle. This means greater convenience because it is no longer necessary to perform time-consuming adjustment of the shear bucket to the individual carrier vehicle.
Raised corn plate as a useful benefit
Hydraulic pusher for setting down feed even more quickly
The silo block can be set down even more conveniently with a hydraulic full pusher. This accessory is perfectly suited to the filling of automatic livestock feeding systems or for laying in a stock of silage. This pusher is also ideal for setting down a block of corn silage in an animal shed, or for loading the feed mixer where the loader does not have sufficient headroom for tipping. If there are not enough double-action control units on the carrier vehicle, it is advisable to install a sequential shift valve (which can also be sourced from MAMMUT).
Valve selection to complement the SILO BUCKET
In combination with a hydraulically activated accessory such as a pusher, it is advisable to upgrade all control units with the corresponding hydraulic valves. Especially if the carrier vehicle does not have sufficient double-action functions, this is an easy way to remedy that issue.
We would be pleased to advise you on this topic and are sure to find the right solution for your business:
Possible control operations are:
- Opening – Closing
- Hydraulic full pusher
Tip:
Optionally, 2 x DW can be activated with a sequential shift valve (to be used on the hydraulic pusher).
Optional HYDROFIX multi-hose coupler
HYDROFIX multi-hose couplers can be upgraded to make it easier to connect and disconnect the silage shear buckets. These quick-release couplers facilitate clean work without physical effort and without any oil loss. When ordering your cutting bucket you can choose between a range of different multi-hose couplers.