MAMMUT Silo Fox TITAN
More power and effectiveness for the even distribution of silage
The Silo Fox TITAN differs from the entry-level model CLASSIC in that it has a larger drum diameter and therefore has more material throughput during distribution. The higher net weight (approx. 1,100 kg with water filling) also increases the impact force in the trench silo. All models are available as rear-mounted units or front and rear models with reverse gear.
|Rear model standard equipment||Front and rear model standard equipment|
|Three-point attachment cat. 2||Three-point attachment cat. 2|
|Drive shaft||Drive shaft|
|Overload protection built into the distributor||Overload protection built into the distributor|
|–||Reverse gear for front and rear use|
|Spreading width adjustment||Spreading width adjustment|
|Water-fillable distributor druml||Water-fillable distributor drum|
|SF 205 TITAN||SF 245 TITAN|
|Drum diameter||1.150 mm||1.150 mm|
|Total drum width||2.050 mm||2.450 mm|
|Working width||2.700 mm||3.100 mm|
|Power requirement||ab 80 PS||ab 90 PS|
|PTO speed rear/front||540 / 1.000||540 / 1.000|
|Net weight||650 kg||750 kg|
|Additional weight due to water filling (standard)||ca. 450 kg||ca. 450 kg|
|Swivel range to left and right (optional equipment)||ca. 20 °||ca. 20 °|
|Spreading width adjustment|
Tip: Hydraulic pivoting device
Distributing the feed is made even easier with the hydraulic pivoting device. The pivot point close to the three-point attachment not only makes it possible to have a high lateral offset, but also allows the distributor to be swivelled away from the silo wall easily.
In the case of the Silo Fox TITAN model, the pivoting device is already equipped with two cylinders. Here too, a locking block prevents jerky swivelling movements or unwanted swivelling in of the device. This also makes driving on the road safer.