MAMMUT Self-Filling pan mixer
Increased working comfort thanks to own loading bucket
The two types of pan mixers TM 125 SF and TM 150 SF are each equipped with their own hydraulic loading bucket. With these practical self-filling models, the mixing components are picked up by the bucket position close to the ground and then automatically emptied into the drum. This saves the need for a separate filling vehicle and thus increases efficiency and working comfort on the construction site. With the standard three-point linkage including chain as well as a bag opener and the tractor guard, the tractor concrete mixer is always ready for spontaneous use. For safe transport of the mixer, a fork-lift attachment is also included in the standard equipment.
Own loading bucket for filling
Highest efficiency and working comfort
Two different models
3 years warranty on the gear
Type overview

TM 125 SF
The TM 125 SF is the perfect addition to any construction site with its 500 litres of concrete payload and loading bucket fitted as standard. From approx. 70 hp tractor power, this compulsory mixer can mix simultaneously and also be moved in the rear hydraulics. The hydraulic bucket fitted on the concrete mixer is easily controlled with two double-acting cylinders and is thus a practical support when filling the mixing components.

TM 150 SF
With a drum diameter of 1,500 mm, the TM 150 SF self-filling pan mixer brings a useful volume of 750 litres. The hydraulic loading bucket is included in the standard equipment and reliably transports the mix into the mixing drum by actuating the two cylinders. To use this model properly, at least 90 hp is required on the tractor.
Technical data
TM 125 SF | TM 150 SF | |
---|---|---|
Usable capacity for concrete | 500 l | 750 l |
Capacity for light material | 700 l | 940 l |
Drum diameter | 1.250 mm | 1.500 mm |
Drum height | 625 mm | 625 mm |
Type of drive | PTO shaft | PTO shaft |
Power requirement | Mixing and driving from 70 hp | Mixing and driving from 90 hp |
Net weight | approx. 580 kg | approx. 680 kg |
Spring-loaded mixing arms | 4 pc. | 4 pc. |
Concrete mixing capacity | approx. 8 m³ / h | approx. 13 m³ / h |
Number of pushers | 1 pc. mechanical | 1 pc. mechanical |
Chute | Rigid | Rigid |
Accessories
Hydraulic motor as option
If no PTO drive is available for concrete mixing, the self-filling models can also be equipped with an oil engine available ex works. A flow rate of approx. 60 litres/min. is required to drive the hydraulic motor. With a standard forklift insert in the base frame, the mixer can be transported safely and easily with a forklift or pallet fork.
Hydraulic pusher opening
In the TURBO MIX SF series, the closing and opening of the outlet opening is mechanically solved. To automate this and operate it from the comfort of the tractor, a hydraulic opening is available as an option. This additionally simplifies concreting and significantly increases working comfort during mixing.
Other models:
Standard pan mixer
240 to 1200 litres usable quantity of concrete
95 to 200 cm drum diameter
Special pan mixer
240 to 750 litres usable quantity of concrete
95 to 150 cm drum diameter