MAMMUT Self-Filling Concrete Mixer TURBO MIX SF
Increased working comfort thanks to own loading bucket
The two types TM 125 SF and TM 150 SF are each equipped with their own hydraulic loading bucket. With these practical self-filling models, the mixing components are picked up by the bucket position close to the ground and then automatically emptied into the drum. This saves the need for a separate filling vehicle and thus increases efficiency and working comfort on the construction site. With the standard three-point linkage including chain as well as a bag opener and the tractor guard, the tractor concrete mixer is always ready for spontaneous use. For safe transport of the mixer, a fork-lift attachment is also included in the standard equipment.
The TM 125 SF is the perfect addition to any construction site with its 500 litres of concrete payload and loading bucket fitted as standard. From approx. 70 hp tractor power, this compulsory mixer can mix simultaneously and also be moved in the rear hydraulics. The hydraulic bucket fitted on the concrete mixer is easily controlled with two double-acting cylinders and is thus a practical support when filling the mixing components.
With a drum diameter of 1,500 mm, the TM 150 SF self-filling concrete mixer brings a useful volume of 750 litres. The hydraulic loading bucket is included in the standard equipment and reliably transports the mix into the mixing drum by actuating the two cylinders. To use this model properly, at least 90 hp is required on the tractor.
|TM 125 SF||TM 150 SF|
|Usable capacity for concrete||500 l||750 l|
|Capacity for light material||700 l||940 l|
|Drum diameter||1.250 mm||1.500 mm|
|Drum height||625 mm||625 mm|
|Type of drive||PTO shaft||PTO shaft|
|Power requirement||Mixing and driving from 70 hp||Mixing and driving from 90 hp|
|Net weight||approx. 580 kg||approx. 680 kg|
|Spring-loaded mixing arms||4 pc.||4 pc.|
|Concrete mixing capacity||approx. 8 m³ / h||approx. 13 m³ / h|
|Number of pushers||1 pc. mechanical||1 pc. mechanical|